How to Open Ports on the Smart Router to Use Hidemyass

If you’ve been researching how to secure your home Wi-Fi, you’ve probably come across the term “smart router.” A smart router is a type of router that can be controlled remotely (usually via a smartphone app), which means that it can be configured to allow only certain people or devices to access the Internet via Wi-Fi connection, or to restrict the sites that users can access. Smart routers can also be configured to automatically close ports that are not needed so that Wi-Fi use is more secure and less wasteful.

If you decide that a smart router is right for your home, there are a few things you should know before connecting it to the Internet. First, make sure that the router is what its makers claim it to be; a smart router cannot compensate for malfunctioning hardware or substandard firmware. Second, ensure that you’re not connecting to the router via a wireless network that is open to the public. Third, if you have Internet-connected devices, ensure that they’re protected from hackers who might try to access your personal data via the Internet. Lastly, if you run a business that relies on remote access to your servers, ensure that everything is secure and that your passwords are never shared with anyone.

What Are The Benefits Of Using A Smart Router?

There are several benefits to using a smart router, not the least of which is that it can make Wi-Fi more secure. When connected to a smart router, data can only be sent to and from devices that are on the approved access list. Smart routers can also be configured to allow specific websites to be accessed only from the device that is connected to it. This means that if you want to stream movies or TV shows to your TV using a tablet or smartphone, you’ll have to download the content first and then stream it to your TV via a wireless connection rather than straight from the Internet. Most importantly, smart routers can be controlled remotely via a mobile app, which means that users can configure them to allow or disallow certain Internet activities, such as Web browsing or email communication, from happening.

How Do I Set Up A Smart Router?

There are two ways to set up a smart router. The first is to physically connect it to the Internet via an Ethernet cable, and the second is to use a Wi-Fi connection that is already accessible to the router. The first method is the simplest, but if you want to control the router remotely using a mobile app, you’ll need the second option. To physically connect the smart router to the Internet via Ethernet cable, follow these steps:

(a) From the router menu, select the Settings icon (looks like two parallel lines) and click on the button to enter the configuration screen. Alternatively, you can connect the router directly to your computer via a powered USB cable and use a cable management tool to configure the settings, such as WiFi Explorer or NETGEAR WiFI Connect.

(b) From the configuration screen, you can choose between the two options for connecting to the Internet: Wired or Wi-Fi. For this tutorial, we’ll use the latter.

(c) To connect to a Wi-Fi network, choose either the free public Wi-Fi hotspots, which can often be found at convenient locations such as coffee shops or airports, or the built-in Wi-Fi of your router. If you decide to use a public Wi-Fi hotspot, ensure that its security settings are the same as those of your home network.

(d) To connect to a Wi-Fi network named HomeNetwork in the Coffee shop, enter the network’s password (if requested) and click on the OK button. If you don’t know the network’s password, ask the personnel at the coffee shop for help or look it up online.

(e) Once the network is connected, choose the Network Tools icon (looks like a TV) and click on the IPv4 setting to expand the interface.

(f) In the IPv4 Settings, you’ll see all the available IP addresses (for example, 192.168.0.1, 192.168.0.2, and 192.168.0.3). Choose the one that you want to use for this device (note that you cannot use the same IP address for different devices on your network), and save it to the clipboard by clicking on the bin icon (looks like a trash can).

(g) From the main menu, choose the Settings icon and click on the name of the network (in this case, HomeNetwork).

The settings will now change and you’ll see a green checkmark next to the box identifying the IP address you just copied.

(h) Choose the Network Tools icon (looks like a TV) and click on the Routes tab to see a list of all the available routes.

(i) In our example, we have three routes: 1) VPN, which stands for virtual private network; 2) Direct, which points directly to the Internet; and 3) Cloudflare, which is a free caching service that can speed up website load times for users.

(j) Click on the plus button to add a new route. In this case, we’ll use the Cloudflare option. When completed, click on the Save icon. As you can see, the entry has a green checkmark next to it, which means that it’s active and ready to be used. To make sure, hover over the entry and click on the triangle to the right of the checkmark.

(k) The last step is to choose the DNS Settings icon (looks like a TV with a light on it) and enter the DNS servers (in this case, 1.1.1.1 and 8.8.8.8) that you want to use. You can test the settings by clicking on the Test DNS button (looks like a gear).

As soon as you complete the last step, your smart router will be operating in stealth mode—that is, it will be functioning normally but without any activity visible to other devices on the network. To make sure, open a command prompt on your computer and type in the following (assuming your computer is still connected to the Internet via Ethernet cable at this point):

ping 8.8.8.8

This will ping the DNS servers that you just entered, and if all is well, you’ll see something like the following:

Pinging 8.8.8.8 [254.124.4.124] with 32 bytes of data:

Ping statistics for 8.8.8.8:

Packets sent: 2, Sent packets: 2, Received packets: 0, Packets received: 0, Bytes transferred: 0

Note that in the output, you can see the IP address that is requesting a response from your DNS servers (in this case, 8.8.8.8). This could be anyone on your network wanting to connect to the Internet via your smart router. To protect your personal data from cyberattacks, you should never provide your DNS servers to anyone.

Where Do I Get Offers For Free Wi-Fi In My Area?

If you decide to use a smart router for security purposes, the first thing you’ll need to do is to enter the network name (SSID) and password that you want to use for the network in the Router menu under Settings. Once you do, the settings will change and you’ll see an area that indicates the name and location of the networks that are in range (that is, within wireless range of the router). You can click on the information button next to any of these networks to see a list of all the available names and passwords for it. You can also choose to view a map that shows you the range of the network, as well as the strength of the signal (in decibels) coming from it.

How Many Devices Can I Connect To My Smart Router?

With a smart router, you can only have a certain number of connected devices. This is usually decided by software rather than hardware, so when you run out of slots, you’ll just have to delete some devices or change the settings of the ones that you want to keep. You cannot, however, increase the capacity by adding more hardware, as the device itself is limited to how many wireless networks it can handle. If you have a multi-device home, you will have to share the connection with some other device that is connected to the Internet. For a better connection quality, you should use a wired network rather than a Wi-Fi one. This is because most Wi-Fi networks are designed to work with multiple devices, and increasing the number of users reduces the speed of the connection for everyone.

Similar Posts