How to Use NordVPN with Linksys WRT1900AC

If you live in the UK, you might want to consider investing in a home networking setup that supports the country’s favourite streaming service, namely, Netflix. The good news is that you can get a high-quality and reliable router that also supports Netflix without having to break the bank. That router is the Linksys WRT1900AC. Now, you might be wondering how you can use Netflix with a router, especially one that supports a fast connection speed of up to 1.96Gbps like the WRT1900AC. The answer is NordVPN, a VPN service that was designed with Netflix users in mind. In this post, we will cover how to use NordVPN with the Linksys WRT1900AC to get the best possible Netflix experience at home.

Install And Configure NordVPN on Your Router

First things first, you will need to download and install NordVPN on your computer. Once you have installed the software, you will need to open it and log in with your email address and password. You will then need to click the link in the email that was sent to you by NordVPN to confirm your subscription. After that, you can close the software and move on to the next step.

Activate NordVPN On Your Router

After you have installed and configured NordVPN on your computer, you can move on to the next step which is to activate the software on your router.

To do this, you will need to enter the admin page of your router. Usually, this is found either by entering http:// or 192.168.1.1 into your browser’s address bar. If this is the first time you are accessing this page, you will need to press the button to continue to the next step. Otherwise, you can skip this step and move on to the next step.

Once you are on the router’s admin page, you will need to scroll down until you see a section labelled as “VPN”. Depending on the type of router you have, this could be a little bit different but it will likely be in some form of “Virtual Private Network”. When you find it, you will need to click the button to the right of the VPN section to continue to the next step.

Add A VPN Server To Your Router

Adding a VPN server to your router is very similar to adding another device to your home network. To do this, you will need to enter the admin page of your router again and scroll down to the VPN section. At the top right of this section, you will see four slots. These are for you to fill with the details of a new VPN server. You will need to enter the IP address, the port number (usually, this is either port 80 or 443), and the authentication credentials for this VPN server. The last step is to press the “save” button at the bottom to save these settings.

With that done, you can now go back to the main page of your router and try to connect to the VPN server you just added. In some cases, you might need to enter the credentials again but most often, this will work out of the box. If not, simply follow the on-screen instructions.

Use Your VPN With Netflix

Once you have added a VPN server to your router, you can use it with any app or website you want. However, it is highly recommended that you use VPN with Netflix as the service has been designed with mobile devices in mind. If you browse the web on your laptop or desktop computer, you will notice that the streaming platform automatically detects and sets up a VPN connection as soon as you load the webpage.

To use your VPN with Netflix, you will first need to log in to your account on the site. When you do this, you will see a yellow bar along with the words “Connected” and “Disconnected”. The good news is that you are now connected to the VPN and can continue to use the site as normal.

If you want to use Netflix with a different account on your laptop or desktop device, you will need to uninstall the VPN software. Then, you can log back in to the account you wish to use and continue as normal. To prevent any conflicts, it is recommended that you don’t use the same account for both the Netflix website and the VPN. Otherwise, you could end up with duplicated content on both platforms.

Protect Your Router With The Right Password

It is important to secure your router with a password. This will help protect your network and the devices connected to it from unwanted intruders. You don’t want anyone to be able to access your valuable network data through your router or even worse, use your device to launch an attack against another network or the internet.

To secure your router with a password, you will need to go to the main admin page of your device. Then, you will need to scroll down to the Wireless section and click the “Security” tab. Depending on the type of router you have, this might be a little bit different but it will likely be in some form of “Security” or “WiFi Security”. When you find it, you will need to enter a password of at least 8 characters.

If you want to use a VPN with Netflix, it is important to keep in mind that the platform requires that your router is secure. Otherwise, you could end up with a serious security risk. As a result, you could lose all your personal data or even have your device used for malevolent purposes.

Use A VPN To Unblock GeoRestrictions

It is important to be able to access geo-restricted content whenever you want. However, when you are traveling abroad, you might not want to do this on public Wi-Fi due to the possible security risks. In those cases, you can use a VPN to unblock any geo-restrictions and enjoy your favorite shows wherever you go.

To do this, you will need to first connect to a VPN server that is located in a country with no geostrategic restrictions. Next, you will need to head to the settings page of the service and change the location to “US”. Finally, you will need to change the IP address of your computer to one that is allocated to the US and restart your device. Now, you can use the VPN to access any restricted content on the web.

Once you have changed the settings and restarted your device, you can go back to the site you want to visit and see if it is now available. If not, you will need to update your VPN settings and try again. This process may take a little bit of time but it is still a lot easier and more convenient to use a VPN instead of trying to figure out which websites are blocked where you live.

Take A Screenshot To Easily Share The Web Server Config With Others

One of the great things about Hulu is that you can make a screenshot of the web server configuration page and easily share it with others. However, if you are doing this from a public Wi-Fi hotspot, it is in your best interest to use a VPN. Otherwise, you could end up sharing your personal VPN settings with others, and that is something you do not want to do. To avoid this, you can take a screenshot of the VPN settings page and easily share it with others. To do this, you will need to follow the same steps as before but instead, you will need to go to the network settings page of your VPN app and click “take a screenshot”. Then, you will need to save the image to your device’s storage.

Since we are already on the VPN settings page, you can simply navigate to the “Sharing” section and click on the “+Add New Share” button. Now, you will need to type in a name for your share and click “save”. This will make a copy of your VPN server settings and allow you to easily share them with others. When they visit your network, they will see this screen along with the settings for your VPN server. They will not see any personal information about you.

Use A VPN To Browse The Web More Securely

If you are the type of person who always stays connected to the internet while you are away from home (either on the move or just for some necessary shopping online), you can use a VPN to browse the web more securely. Just remember that a VPN can slow down your browsing speed as more resources are being used to encrypt and decrypt your data. This process is also a bit more complicated when compared to just setting up a standard VPN connection. Also, make sure that you are constantly using a VPN when you are online. This will eventually lead to better protection and fewer online security issues.

Similar Posts